Posts Tagged → xc-3
Open Workbench Logic Sniffer First Impressions
A while ago I spotted the Open Workbench Logic Sniffer on Hackaday. A logic sniffer . analyser is a useful tool have around the place and at ~$50 with some flying leads to make it up to the free shipping threshold. Seeing as it arrived the other day I thought I would share my first impressions of it…
Energy Monitor – part 2
So, now I hopefully(!) have my cable which will give me access to the UART RX of the CC128 energy monitor. Time to try it out and begin processing some data with it!
Firstly, I go to the XMOS website and get the UART code and play around with it to create the UART code I want (RX only at the moment), compile it and give it a run.
But it’s never that simple! All I get are null characters. Odd I think – so I recheck the wiring, recheck the code. All seems to be ok.
Continue reading →
Energy Monitor – Part 1
My energy monitor arrived today! It’s working well – I was slightly worried about how good the reception would be for the transmitter, but I am pleasantly surprised that even with the receiver 3 floors above the transmitter it seems to register a good signal.
But that’s boring – time to start hacking!
So, first thing I need is the interface cable. The back of the unit has a handy RJ45 connector that has serial in it (see my initial energy monitoring post). This needs connecting to my XC-3 kit so that I can begin to get the data out of it. So time to get the soldering iron out!
Energy Monitoring
Was at a friends today and he showed me an energy monitor that he had bought and was using to monitor his electricity supply. I was like “hmm… this could be something fun to attach to an XCore and get some graphs out of”.
My thought is to use my XC-3 (or maybe get an XC-2) to connect to an energy monitor receiver – or hack/make a receiver and then push the data somewhere useful via Ethernet. In fact I could combine it with my network monitor, ditch the screen and have it push the all the different types of data out into some nice pretty graphs. Anyway, enough brain dump – onto the hardware!
Embedded Traffic Monitor
This is the initial release of the embedded traffic monitor which I implemented on an XMOS XC-3 development kit. It has a 256×32 VFD attached to it with a custom board that was designed from another application (hence the buttons/IR sensor you’ll notice if you are observant). Full source code is available from the embedded traffic monitor sourceforge page.
More information and pictures after the break…
Hackaday
XMOS Community